10 min read

How to Promote Your Blog Posts (Without Burning Out)

Writing is only 20% of the job. Here are the channels that get your blog posts read, from social media and Hacker News to SEO and newsletters, and how to pick the right two or three.

Hugo
HugoNov 9, 2026 · 10 min

People write for all kinds of reasons.

Sometimes it's purely personal. You write to think more clearly, to keep a trace, or just because you enjoy it.

But very often, you write to share something: an experience, a skill, a few tricks, a good tip you wish someone had given you earlier. And for some of us, writing is part of the job. It's professional content, and it has to bring something back.

In those last two cases, you want to be read. Otherwise, what's the point?

Here's the uncomfortable part. There's an old rule of thumb in content marketing, a kind of Pareto principle for bloggers: writing is 20% of the work, promoting is the other 80%.

So in this post, I'll walk you through the methods I know to get your content in front of readers, from the quick wins of launch day to the slow channels that keep paying off for years.

Good news: Writizzy handles part of it for you.

The immediate boost: tell people your post exists

The first step is the most obvious one. Let people know your post is out.

There are plenty of places to do that. Which ones make sense depends on your niche and on whether you already have an audience somewhere.

Your own social networks

Share the post on the networks where you're already active. It sounds basic, and it is. But it's also the step most people skip, because it's tedious. You open a tab per network and rewrite the same teaser each time.

That's why Writizzy does it for you. Connect LinkedIn, Mastodon, Bluesky or Discord once, and each new article is announced automatically, with a message adapted to each network. You can let it run on its own or review every draft before it goes out. I wrote more about it in How to Share Your Blog Posts Across All Social Networks in 1 Click.

If you're brave, you can go further and turn your article into a carousel or an infographic. Those formats travel well on LinkedIn and Instagram. It's extra work, and Writizzy won't do it for you.

Communities: Reddit, Discord, Slack, Telegram

Then there are communities. A subreddit about your topic, a Discord server, a Slack workspace, a Telegram group. These are places where people already gather around the subject you write about.

Writizzy can post to a Discord server automatically. For Slack, Telegram or anything else, the webhook channel sends your new posts to Zapier, Make or n8n, and from there you can send them almost anywhere.

But be careful here. Communities hate spam. Dropping a link and leaving is the fastest way to get banned, or worse, to get a reputation. Every community has its own rules, written or not. Some welcome self-promotion on certain days, some forbid it entirely, and most expect you to take part in discussions before you share your own stuff.

So do it smartly, and only where your post answers a question people are actually asking. No tool can do that part for you. It's on you.

Niche platforms: Hacker News, dev.to and friends

Every niche has its own platforms where people go to find something to read. You need to know yours.

If you're a developer, that's Hacker News, or the Journal du Hacker if you write in French.

These platforms don't all work the same way, and that matters.

Some are naturally viral. On Hacker News, a post that catches on can bring thousands of visitors in a few hours. It can also sink without a trace, and you won't always know why.

Others need local effort. dev.to is a good example. Writizzy can republish your full article there automatically, with a canonical link back to your blog so your original keeps its SEO. But if you do nothing else, nobody will read it. dev.to rewards people who take part in the conversation, so you'll need to comment and reply there too. Plan for a double effort.

The open social web

This one is newer, and honestly it's the one I find the most exciting.

Bluesky runs on an open protocol called AT Protocol. Around it, there's a whole ecosystem of apps, sometimes called the Atmosphere, that share the same users and the same data. Bluesky alone passed 43 million registered accounts in April 2026.

Some of those apps are made for long-form reading. Standard Reader, for example, shows the most-read articles across the network, with a feed to discover new writers.

Of course, not all of those people read long articles in a dedicated reader. Most of them never will. But it's still a huge pool of potential readers that has nothing to do with your existing audience.

On Writizzy, it takes one step. Connect your Bluesky account, and each article is published to the network as a real article, not just a link. Replies on Bluesky even show up under your post. I explained the whole idea in Writizzy is now connected to the Atmosphere.

Authority and targeted traffic: borrow other people's audiences

The second family of channels is slower. You're not shouting "new post!" anymore. You're building a presence in places where your future readers already are.

Republishing on Medium or LinkedIn

General platforms like Medium or LinkedIn articles come with their own distribution. You publish there, and the platform shows your writing to people who would never have found your blog. Little effort, decent reach.

Two things to keep in mind.

First, protect your SEO. Medium's import tool adds a canonical link to your original post, so Google knows which version came first. LinkedIn articles don't let you do that, so I'd publish there a few days after your blog, or share an adapted version rather than a copy.

Second, Writizzy's LinkedIn channel posts an announcement on your profile, not a full LinkedIn article. For a full republication, you'll have to do it by hand.

Commenting on other blogs

This one is old-school, and it still works.

Read the blogs in your niche. When you have something useful to add, leave a real comment. "Great post!" doesn't count. Bring a counter-example or a story from your own experience.

People notice, and the author notices too. That's how conversations start, and some of them turn into links and invitations later.

Guest blogging

The next step is to write for someone else's blog. You bring your expertise to their audience, and in return you get a link back and a few new readers who now know your name.

It takes time. You have to find the right blogs, pitch an idea, and then write something good enough for an audience that doesn't know you yet. But a single good guest post in the right place can do more than months of tweets.

Passive, long-term traffic: SEO

SEO is a huge topic. It deserves an article of its own, and I'll probably write one.

But here's the basic idea. SEO is about answering what people are searching for. Someone types a question into Google; if your article is the best answer, it eventually shows up.

That shapes a lot of decisions:

  • The title. It should match the words people actually type, not just sound clever.
  • The structure. Clear headings that follow the questions a reader would ask.
  • Links between your posts. When two articles cover related topics, link them. It helps readers and search engines understand what your blog is about.

SEO is slow. It can take weeks or months before an article ranks. But once it does, it brings readers every day without you lifting a finger. Few channels on this list keep working while you sleep.

On Writizzy, the SEO audit checks the technical side for you: title and meta description length, heading structure, image alt texts, links to your other posts, and so on. Every post gets a score and a list of things to fix.

What it doesn't tell you is whether anyone is searching for your topic in the first place. For that, you need other tools. Start simple: look at Google's autocomplete suggestions and the "People also ask" box for your subject. Once your blog has a bit of traffic, Google Search Console shows you the queries you already appear for. And dedicated keyword tools will give you search volumes if you want to go further.

Keep your readers so you don't start from zero

Before going out to find new readers, make sure you keep the ones you already have.

Without that, every new article starts from zero. You do all the promotion work again, and the readers who loved your last post have probably forgotten your blog's name.

The best tool for that is still the newsletter. People who subscribe get your next post in their inbox. There's no algorithm in between, and you don't depend on being lucky on social media that day.

Turn on the subscription popup

On Writizzy, once your newsletter is enabled, a subscription form appears on your blog. But there's also an option for a subscription popup.

I know. Popups are intrusive and annoying. I don't like them either.

But the numbers are hard to ignore. A study by Sumo of around 2 billion popups found an average conversion rate of 3.09%, and the best ones reached 9.28%. A form at the bottom of a post only converts the readers who scroll that far, and most don't.

Writizzy's version tries to be polite about it. It only shows up once a reader has scrolled through 40% of your article, so they're already interested. And if they close it, it doesn't come back.

You'll find it in Settings > Newsletter.

Here's another bonus on Writizzy: recommendations.

You can recommend up to 10 other blogs. Right after someone subscribes to your newsletter, they're offered up to 3 of your recommendations. That's the moment readers are most open to discovering something new.

And it works both ways. When another writer recommends you, their new subscribers see your blog. You get an email when it happens, with a button to recommend them back.

It's a way to tap into the Writizzy network without spending a single hour on promotion. You'll find it in Settings > Newsletter > Recommendations.

Pick two or three channels, not ten

If you've read this far, you might be feeling a bit tired. That's normal. All of this is work, and nobody can do everything.

So don't. Pick two or three channels, and do them well. You're much better off doing two things consistently than ten things once.

Here's the order I'd suggest:

  1. Start with what Writizzy does for you. Take care of your SEO basics and turn on cross-posting to your social networks. Once it's set up, it costs you almost nothing.
  2. Then build your newsletter, with the popup and recommendations, and connect Bluesky to reach the open network.
  3. Only after that, invest in the channels that take real time: guest blogging, niche platforms like Hacker News, communities like Reddit.

Writing is still the part that matters most. It would be a shame if nobody read it.

If you want to set up the first steps now, go to Settings > Integrations > Channels and connect your networks.

Hugo

Written by

Hugo

Software Engineer with more than 20 years of experience. I love to share about technologies and startups

Enjoyed this story?

About one email a month, when a piece is worth writing.

944 subscribers · unsubscribe in one click

Keep reading

How to Share Your Blog Posts Across All Social Networks in 1 Click

Stop choosing between writing and promoting. Writizzy automates your social sharing and generates automatic teasers for LinkedIn, Bluesky, Mastodon, and more.

Jun 24, 2026

Writizzy is now connected to the Atmosphere

When I started building Writizzy, I wanted to solve one problem with blogs: distribution.

Aug 18, 2026

Monetize your blog without commissions

Turn your passion into revenue. Writizzy now supports paid subscriptions with premium content. The best part? We take 0% commission on your earnings.

Feb 18, 2026